This bend has been made by using high quality stainless steel. It’s bent to an angle of 180 degrees and has a wall thickness of 1.6mm. The leg sizes of each side of the bend are outside measurements. All pipe bending is manufactured at our premises in Queensland. We ship all our products Australia wide and internationally.

Size : 25mm/ 1 inch

Leg Length: 100mm on each side

Thickness : 1.6

Material : 316 ( Stainless steel)

Radius : 1.5D of pipe size

Finish : Polish Brush

This bend has been made by using high quality stainless steel. It’s bent to an angle of 90 degreeS and has a wall thickness of 1.6mm. The leg sizes of each side of the bend are outside measurements. All pipe bending is manufactured at our premises in Queensland. We ship all our products Australia wide and internationally.

Size : 25mm/1 inch

Leg Length: 100mm on each side

Thickness : 1.6mm

Material : 316 ( Stainless steel)

Radius : 1.5D of pipe size

Finish : Polish Brush

This bend has been made by using high quality stainless steel. It’s bent to an angle of 180 degrees and has a wall thickness of 1.6mm. The leg sizes of each side of the bend are outside measurements. All pipe bending is manufactured at our premises in Queensland. We ship all our products Australia wide and internationally.

Size : 32mm/ 1.25 inch

Length : 150mm each side

Thickness : 1.6

Material : 316 ( Stainless steel)

Radius : 1.5D of pipe size

Finish : Polish Brush

This bend has been made by using high quality stainless steel. It’s bent to an angle of 90 degrees and has a wall thickness of 1.6mm. The leg sizes of each side of the bend are outside measurements. All pipe bending is manufactured at our premises in Queensland. We ship all our products Australia wide and internationally.

Size : 32mm/1.25 inch

Length : 100mm each side

Thickness : 1.6mm

Material : 316 ( Stainless steel)

Radius : 1.5D of pipe size

Finish : Polish Brush

This bend has been made by using high quality stainless steel. It’s bent to an angle of 90 degrees and has a wall thickness of 1.6mm. The leg sizes of each side of the bend are outside measurements. All pipe bending is manufactured at our premises in Queensland. We ship all our products Australia wide and internationally. These bends are perfect for exhaust as they are mandrel bent and have a perfect round shape. Perfect bends For motorbike exhaust or car exhausts.

Size : 38mm/1.5 inch

Leg Length: 130mm on each side

Thickness : 1.6mm

Material : 316 ( Stainless steel)

Radius : 1.5D of pipe size

Finish : Polish Brush

This bend has been made by using high quality stainless steel. It’s bent to an angle of 90 degrees and has a wall thickness of 1.6mm. The leg sizes of each side of the bend are outside measurements. All pipe bending is manufactured at our premises in Queensland. We ship all our products Australia wide and internationally. These bends are perfect for exhaust as they are mandrel bent and have a perfect round shape. Perfect bends For motorbike exhaust or car exhausts.

Size : 63mm/2.5 inch

Leg Length: 150mm on each side

Thickness : 1.6mm

Material : 316 ( Stainless steel)

Radius : 1.5D of pipe size

Finish : Polish Brush

This bend has been made by using high quality stainless steel. It’s bent to an angle of 45 degrees and has a wall thickness of 1.6mm. The leg sizes of each side of the bend are outside measurements. All pipe bending is manufactured at our premises in Queensland. We ship all our products Australia wide and internationally.

Size : 25mm/1 inch

Leg Length: 100mm on each side

Thickness : 1.6mm

Material : 316 ( Stainless steel)

Radius : 1.5D of pipe size

Finish : Polish Brush

This bend has been made by using high quality stainless steel. It’s bent to an angle of 180 degrees and has a wall thickness of 1.6mm. The leg sizes of each side of the bend are outside measurements. All pipe bending is manufactured at our premises in Queensland. We ship all our products Australia wide and internationally. These bends are perfect for exhaust as they are mandrel bent and have a perfect round shape. Perfect bends For motorbike exhaust or car exhausts.

Size : 50mm/ 2 inch

Leg Length: 130mm on each side

Thickness : 1.6

Material : 316 ( Stainless steel)

Radius : 175R

Finish : Polish Brush

This bend has been made by using high quality stainless steel. It’s bent to an angle of 180 degrees and has a wall thickness of 1.6mm. The leg sizes of each side of the bend are outside measurements. All pipe bending is manufactured at our premises in Queensland. We ship all our products Australia wide and internationally. These bends are perfect for exhaust as they are mandrel bent and have a perfect round shape. Perfect bends For motorbike exhaust or car exhausts.

Size : 44mm/ 1.75 inch

Leg Length: 130mm on each side

Thickness : 1.6

Material : 316 ( Stainless steel)

Radius : 1.5D of pipe size

Finish : Polish Brush

This bend has been made by using high quality stainless steel. It’s bent to an angle of 45 degrees and has a wall thickness of 1.6mm. The leg sizes of each side of the bend are outside measurements. All pipe bending is manufactured at our premises in Queensland. We ship all our products Australia wide and internationally. These bends are perfect for exhaust as they are mandrel bent and have a perfect round shape. Perfect bends For motorbike exhaust or car exhausts.

Size : 50.9mm/2 inch

Leg Length: 130mm on each side

Thickness : 1.6mm

Material : 316 ( Stainless steel)

Radius : 1.5D of pipe size

Finish : Polish Brush

This bend has been made by using high quality stainless steel. It’s bent to an angle of 90 degrees and has a wall thickness of 1.6mm. The leg sizes of each side of the bend are outside measurements. All pipe bending is manufactured at our premises in Queensland. We ship all our products Australia wide and internationally. These bends are perfect for exhaust as they are mandrel bent and have a perfect round shape. Perfect bends For motorbike exhaust or car exhausts.

Size : 50.9mm/2 inch

Leg Length: 130mm on each side

Thickness : 1.6mm

Material : 316 ( Stainless steel)

Radius : 1.5D of pipe size

Finish : Polish Brush

This bend has been made by using high quality stainless steel. It’s bent to an angle of 45 degrees and has a wall thickness of 1.6mm. The leg sizes of each side of the bend are outside measurements. All pipe bending is manufactured at our premises in Queensland. We ship all our products Australia wide and internationally. These bends are perfect for exhaust as they are mandrel bent and have a perfect round shape. Perfect bends For motorbike exhaust or car exhausts.

Size : 63mm/2.5 inch

Leg Length: 150mm on each side

Thickness : 1.6mm

Material : 316 ( Stainless steel)

Radius : 1.5D of pipe size

Finish : Polish Brush